Show Ip Udp-Helper; Ip Http Source-Interface - Dell S4810 Reference Manual

show ip udp-helper

Display the configured UDP helpers on all interfaces.
S4810
Syntax
show ip udp-helper
Defaults none
Command EXEC
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
8.3.19.0
Version 8.3.11.1
Version 8.3.7.0
Pre-version
8.3.7.0
Example
Dell#show ip udp-helper
--------------------------------------------------
Port
--------------------------------------------------
Gi 10/0
Gi 10/1
Related
debug ip udp-helper
Commands
console.
ip udp-broadcast-address
ip udp-helper udp-port
for all UDP ports or a specified list of UDP ports.

ip http source-interface

Specify an interface as the source interface for HTTP connections.
This feature is supported on S4810 platform.
Syntax ip http source-interface interface
To delete an interface, use theno ip http source-interface interface command.
820
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the E-Series ExaScale.
UDP port list
656, 658
All
— enables debug and displays the debug information on a
— configures a UDP IP address for broadcast.
— enables the UDP broadcast feature on an interface either
Interfaces