Dell S4810 Reference Manual page 754

Version 9.0.2.0
Version 9.1.
(0.0)
Version
8.3.19.0
Version 8.3.11.1
Usage
For more information about VLANs and the commands to configure them, refer to
Information
the
FTP, TFTP, and SNMP operations are not supported on a VLAN. MAC ACLs are not
supported in VLANs. IP ACLs are supported. For more information, refer to the
Access Control Lists (ACL)
The following features are not supported on VLANs associated with an OpenFlow
instance:
•
•
•
If OpenFlow VLANs are configured on the switch, spanning-tree protocols cannot
be enabled simultaneously.
Example (Single
Dell(conf)#int vlan 3
Range)
Dell(conf-if-vl-3)#
Related
interface
Commands
interface loopback
interface null
interface port-channel
show vlan
shutdown
tagged
untagged
754
Introduced on the S6000.
Introduced on the S4810; added support for OpenFlow.
Introduced on the S4820T.
Introduced on the Z9000.
Virtual LAN (VLAN) Commands
IPv4
IPv6
MTU
— configures a physical interface.
— configures a loopback interface.
— configures a null interface.
— configures a port channel group.
— displays the current VLAN configuration on the switch.
— disables/enables the VLAN.
— adds a Layer 2 interface to a VLAN as a tagged interface.
— adds a Layer 2 interface to a VLAN as an untagged interface.
section of the Layer 2
chapter.
chapter.
Interfaces