Debug Ip Udp-Helper - Dell S4810 Reference Manual

debug ip udp-helper

Enable UDP debug and display the debug information on a console.
S4810
Syntax
debug ip udp-helper
To disable debug information, use the no debug ip udp-helper command.
Defaults Debug disabled.
Command
•
Modes
•
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
8.3.19.0
Version 8.3.11.1
Version 8.3.7.0
Pre-version
8.3.7.0
Example
Dell#debug ip udp-helper
UDP helper debugging is on
01:20:22: Pkt rcvd on Gi 5/0 with IP DA (0xffffffff) will be
sent on Gi 5/1 Gi 5/2
Vlan 3
01:44:54: Pkt rcvd on Gi 7/0 is handed over for DHCP
processing.
Related
ip udp-broadcast-address
Commands
ip udp-helper udp-port
show ip udp-helper
Interfaces
EXEC
EXEC Privilege
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the E-Series ExaScale.
— enables the UDP broadcast feature on an interface.
— displays the configured UDP helper(s) on all interfaces.
— configures a UDP IP address for broadcast.
817