Show Ip Traffic - Dell S4810 Reference Manual

Column Heading
ospf 100
Total 1388
active...
Example
Dell>show ip route summary
Route Source
connected
static
ospf 100
Intra-area: 762 Inter-area: 1 External-1: 600 External-2: 5
Total
Total 1388 active route(s) using 222440 bytes
Total 2 non-active route(s) using 128 bytes
Dell>
Related
show ip route
Commands

show ip traffic

View IP, ICMP, UDP, TCP and ARP traffic statistics.
S4810
Syntax
show ip traffic [all | cp | rp1 | rp2]
Parameters
all
cp
rp1
rp2
Command EXEC Privilege
Modes
IPv4 Routing
Description
If routing protocols (OSPF, RIP) are configured and routes
are advertised, then information on those routes is
displayed.
Displays the number of active and non-active routes and
the memory usage of those routes. If there are no routes
configured in the Dell Networking OS, this line does not
appear.
Active Routes
17
3
1368
1388
— displays information about the routes found in the switch.
NOTE: These options are supported only on the E-Series.
(OPTIONAL) Enter the keyword all to view statistics from all
processors. If you do not enter a keyword, you also view all
statistics from all processors.
(OPTIONAL) Enter the keyword cp to view only statistics
from the Control Processor.
(OPTIONAL) Enter the keyword rp1 to view only the
statistics from Route Processor 1.
(OPTIONAL) Enter the keyword rp2 to view only the
statistics from Route Processor 2.
Non-active Routes
0
0
2
2
901