Show Qos Dcb-Input - Dell S4810 Reference Manual

0
0
1
0
2
0
3
0
4
0
5
0
6
0
7
0

show qos dcb-input

Displays the PFC configuration in a DCB input policy.
S4810
Syntax
show qos dcb-input [dcb-input-policy-name]
Parameters
dcb-input-
policyname
Command EXEC Privilege
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
8.3.19.0
Version
8.3.12.0
Version
8.3.16.0
Usage
Information
Example
Dell(conf)# show qos dcb-input
(Summary)
dcb-input pfc-profile
dcb-input pfc-profile1
Data Center Bridging (DCB)
Enter the PFC profile.
Introduced on the S4820T.
Introduced on the S4810.
Introduced on the MXL 10/40GbE Switch IO Module.
NOTE: Please note that Dell Networking does not recommended to use this
command as it has been deprecated in the current 9.4.(0.0) release. A warning
message appears when you try to run this command indicating that you have
to use the dcb-map commands in the future.
pfc link-delay 32
pfc priority 0-1
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
531