Fsck Flash - Dell S4810 Reference Manual

Version 7.8.1.0
Usage You must include the colon (:) when entering this command.
Information
After reformatting is complete, three empty directories are automatically created
on flash: CRASH_LOG_DIR, TRACE_LOG_DIR and NVTRACE_LOG_DIR.
Related
copy
Commands
the terminal.
show file-systems

fsck flash

Checks the flash file system for errors.
S4810
Syntax
fsck flash:
fsck usbflash:
Defaults none
Command EXEC Privilege
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0
Version 9.1(0.0)
Version
8.3.19.0
Usage Include the colon (:) when entering this command. This command checks the
Information specified flash memory for errors. If errors are found, the command recommends
that you format the flash.
70
Introduced on the S-Series
CAUTION: This command deletes all files, including the startup
configuration file. So, after executing this command, consider saving the
running config as the startup config (use the write memory command or
copy run start command).
– copies the current configuration to either the startup-configuration file or
– displays information about the file systems on the system.
Introduced on the S6000.
Introduced on S4810 and Z9000.
Introduced on S4820T.
File Management