Show Interface Pfc - Dell S4810 Reference Manual

Version 9.0.2.0
Version
8.3.19.0
Version
8.3.12.0
Version
8.3.16.0
Usage Specify a stack-unit number on the Master switch in a stack.
Information
Example
Dell# show dcb
stack-unit 0 port-set 0
PFC Queue Count : 2 (current), 2 (configured)

show interface pfc

Displays the PFC configuration applied to ingress traffic on an interface, including priorities and link delay.
S4810
Syntax
show interface port-type slot/port pfc {summary | detail}
Parameters
port-type slot/
port pfc
{summary |
detail}
Command INTERFACE
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.2.
(0.0)
Version
8.3.19.0
Version
8.3.12.0
Version
8.3.16.0
Data Center Bridging (DCB)
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the S4810.
Introduced on the MXL 10/40GbE Switch IO Module.
DCB Status : Enabled
PFC Port Count : 56 (current), 56 (configured)
Enter the port-type slot and port PFC information.
Enter the keyword summary for a summary list of results or
enter the keyword detail for a full list of results.
Down status messages added.
Introduced on the S4820T.
Introduced on the S4810.
Introduced on the MXL 10/40GbE Switch IO Module.
527