Ftp-Server Topdir - Dell S4810 Reference Manual

size
-------- ------ ------ --------
512
512
512
512
226 Transfer complete
329 bytes received in 0.018 seconds (17.95 Kbytes/s)
ftp>

ftp-server topdir

Specify the top-level directory to be accessed when an incoming FTP connection request is made.
S4810
Syntax
ftp-server topdir directory
Parameters
directory
Defaults The internal flash is the default directory.
Command CONFIGURATION
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0
Version 9.0.0.0
Version
8.3.19.0
Version
8.3.12.0
Version 8.3.11.1
Version 8.1.1.0
Version 7.6.1.0
Version 7.5.1.0
E-Series
Usage After you enable FTP server functions with the ftp-server enable command,
Information Dell Networking recommends specifying a top-level directory path. Without a top-
level directory path specified, the Dell Networking OS directs users to the flash
directory when logging in to the FTP server.
106
date time name
Jul-20-2004 18:15:00 tgtimg
Jul-20-2004 18:15:00 diagnostic
Jul-20-2004 18:15:00 other
Jul-20-2004 18:15:00 tgt
Enter the directory path.
Introduced on the S6000.
Introduced on the Z9000.
Introduced on the S4820T.
Introduced on the S4810.
Introduced on the Z9000.
Introduced on the E-Series ExaScale.
Introduced on the S-Series.
Introduced on the C-Series.
Original command.
Control and Monitoring