Ftp-Server Topdir - Dell S4810 Reference Manual

329 bytes received in 0.018 seconds (17.95 Kbytes/s)
ftp>

ftp-server topdir

Specify the top-level directory to be accessed when an incoming FTP connection request is made.
S4810
Syntax
ftp-server topdir directory
Parameters
directory
Defaults The internal flash is the default directory.
Command CONFIGURATION
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0
Version 9.0.0.0
Version
8.3.19.0
Version
8.3.12.0
Version 8.3.11.1
Version 8.1.1.0
Version 7.6.1.0
Version 7.5.1.0
E-Series
Usage After you enable FTP server functions with the ftp-server enable command,
Information
Dell Networking recommends specifying a top-level directory path. Without a top-
level directory path specified, the Dell Networking OS directs users to the flash
directory when logging in to the FTP server.
Related
ftp-server enable
Commands
106
Enter the directory path.
Introduced on the S6000.
Introduced on the Z9000.
Introduced on the S4820T.
Introduced on the S4810.
Introduced on the Z9000.
Introduced on the E-Series ExaScale.
Introduced on the S-Series.
Introduced on the C-Series.
Original command.
— enables FTP server functions on the E-Series.
Control and Monitoring