Ipv6 Address Eui64 - Dell S4810 Reference Manual

Version 7.8.1.0
Version 7.4.1.0
Usage
•
Information
•
•
•
•
Example
Dell(conf)#interface gigabitethernet 10/0
Dell(conf-if-gi-10/0)#ipv6 address ?
X:X:X:X::X IPv6 address
Dell(conf-if-gi-10/0)#ipv6 address 2002:1:2::3 ?
<0-128> Prefix length in bits
Dell(conf-if-gi-10/0)#ipv6 address 2002:1:2::3 /96 ?
<cr>
Dell(conf-if-gi-10/0)#ipv6 address 2002:1:2::3 /96
Dell(conf-if-gi-10/0)#show config
!
interface GigabitEthernet 10/0
Dell(conf-if-gi-10/0)#

ipv6 address eui64

Configure IPv6 EUI64 address configuration on the interface.
S4810
Syntax
ipv6 address {ipv6-address prefix-length} eui64
To disable IPv6 EUI64 address autoconfiguration, use the no ipv6 address
{ipv6-address prefix-length} eui64 command.
Parameters
ipv6-address
prefix-length
IPv6 Basics
Introduced on the C-Series and S-Series.
Introduced on the E-Series TeraScale.
If two addresses are configured, delete an existing address before configuring a
new address.
If the last manually-configured global IPv6 address is removed using the "no"
form of the command, the link-local IPv6 address is removed automatically.
IPv6 addresses on a single management interface cannot be members of the
same subnet.
IPv6 secondary addresses on management interfaces across platform must be
members of the same subnet.
IPv6 secondary addresses on management interfaces should not match the
virtual IP address and should not be in the same subnet as the virtual IP.
no ip address
ipv6 address 2002:1:2::3 /96
no shutdown
Enter the IPv6 prefix in the x:x:x:x::x format then the prefix
length in the /x format. The range is from /0 to /128.
NOTE: The :: notation specifies successive hexadecimal
fields of zeros.
929