pre-Version
6.1.1.0
Example
Dell#show ip route list test
Codes:C- connected, S - static, R - RIP,
Locally Originated,
type 1,
default,
Gateway of last resort is not set
R
R
R
R
C
Related
ip prefix-list
Commands
prefix list.
show ip prefix-list summary
show ip route summary
View a table summarizing the IP routes in the switch.
S4810
Syntax
show ip route summary
Command
•
Modes
•
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0
IPv4 Routing
Introduced on the E-Series.
B- BGP, IN - internal BGP, EX - external BGP,LO -
O- OSPF, IA - OSPF inter area, N1 - OSPF NSSA external
N2- OSPF NSSA external type 2, E1 - OSPF external type 1,
E2- OSPF external type 2, i - IS-IS, L1 - IS-IS level-1,
L2- IS-IS level-2, IA - IS-IS inter area, * - candidate
>- non-active route, + - summary route
Destination
Gateway
-----------
-------
2.1.0.0/24
via 2.1.4.1, Gi 4/43
2.1.1.0/24
via 2.1.4.1, Gi 4/43
2.1.2.0/24
via 2.1.4.1, Gi 4/43
2.1.3.0/24
via 2.1.4.1, Gi 4/43
2.1.4.0/24
Direct, Gi 4/43
— enters CONFIGURATION-IP PREFIX-LIST mode and configures a
EXEC
EXEC Privilege
Introduced on the S6000.
Dist/Metric Last Change
----------- -----------
— displays a summary of the configured prefix lists.
120/2
3d0h
120/2
3d1h
120/1
3d0h
120/1
3d1h
0/0
3d1h
907