Offline Stack-Unit - Dell S4810 Reference Manual

Version 7.7.1.0

offline stack-unit

Place a stack unit in the offline state.
S4810
Syntax
offline stack-unit number
Parameters
number
Defaults none
Command EXEC Privilege
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0
Version
8.3.19.0
Version 8.3.11.1
Version 8.3.7.0
Version 8.2.1.0
Version 7.7.1.0
Usage
You cannot enter this command on a Master or Standby unit.
Information
The system reboots when the off-line diagnostics complete. This reboot is an
automatic process. A warning message appears when the offline stack-unit
command is implemented.
Warning - Diagnostic execution will cause stack-unit to reboot
after completion of diags.
Proceed with Offline-Diags [confirm yes/no]:y
Related
show environment (S-Series)
Commands
example, temperature, voltage).
Debugging and Diagnostics
Introduced on the S-Series.
Enter the stack-unit id.
Range: S4810 - 0 to 11
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Added a warning message to the off-line diagnostic.
Introduced on the S-Series.
— views the S-Series system component status (for
597