Show Ip Route List - Dell S4810 Reference Manual

Example (vrf)
Dell#show ip route vrf test1
Codes: C - connected, S - static, R - RIP,
Locally Originated,
type 1,
N2 - OSPF NSSA external type 2, E1 - OSPF external type 1,
E2 - OSPF external type 2, i - IS-IS, L1 - IS-IS level-1,
candidate default,
> - non-active route, + - summary route
Gateway of last resort is not set
C

show ip route list

Display IP routes in an IP prefix list.
S4810
Syntax
show ip route list prefix-list
Parameters
prefix-list
Command
•
Modes
•
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0
Version
8.3.19.0
Version 8.3.11.1
Version 8.3.7.0
Version 8.1.1.0
Version 7.6.1.0
Version 7.5.1.0
906
B - BGP, IN - internal BGP, EX - external BGP,LO -
O - OSPF, IA - OSPF inter area, N1 - OSPF NSSA external
L2 - IS-IS level-2, IA - IS-IS inter area, * -
Destination Gateway
----------- -------
13.0.0.0/24 Direct, Te 0/17
Enter the name of a configured prefix list.
EXEC
EXEC Privilege
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the E-Series ExaScale.
Introduced on the S-Series.
Introduced on the C-Series.
Dist/Metric Last Change
----------- -----------
0/0 00:00:04
IPv4 Routing