Show Ip Flow - Dell S4810 Reference Manual

Field
First-Hop
Mac-Addr
Port
VId
EC
Example
Dell#show ip fib stack-unit 0
Destination
------------------------------------------------------
10.10.10.10/32 Direct, Nu 0
Port
-------------
BLK HOLE 0 0
Dell>
Related clear ip fib stack-unit
Commands

show ip flow

Show how a Layer 3 packet is forwarded when it arrives at a particular interface.
S4810
Syntax
show ip flow interface interface {source-ip address
destination-ip address} {protocol number [tcp | udp]} {src-port
number destination-port number}
Parameters
interface
interface
source-ip
address
destination-ip
address
IPv4 Routing
Description
Displays the first hop IP address.
Displays the MAC address.
Displays the egress-port information.
Displays the VLAN ID. If no VLAN is assigned, zero (0) is
listed.
Displays the number of ECMP paths.
Gateway
VId EC
— clear FIB entries on a specified stack-unit.
Enter the keyword interface then one of the following
interface keywords.
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet then the slot/port information.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE then the slot/port information.
Enter the keywords source-ip then the IP source address
in IP address format.
Enter the keywords destination-ip then the IP
destination address in IP address format.
First-Hop Mac-Addr
0.0.0.0 00:00:00:00:00:00
895