Dell S4810 Reference Manual page 899

Example
Dell#show ip int te 0/0
TenGigabitEthernet 0/0 is down, line protocol is down
Internet address is not set
IP MTU is 1500 bytes
Inbound access list is not set
Proxy ARP is enabled
Split Horizon is enabled
Poison Reverse is disabled
ICMP redirects are not sent
ICMP unreachables are not sent
Dell#
Usage The following describes the show ip interface brief command shown in the
Information following example.
Fields
Interface
IP-Address
Ok?
Method
Status
Protocol
Example (Brief)
Dell#show ip int brief
Interface
Status
GigabitEthernet 1/0
down down
GigabitEthernet 1/1
down down
GigabitEthernet 1/2
up
GigabitEthernet 1/3
up
GigabitEthernet 1/4
up
GigabitEthernet 1/5
up
GigabitEthernet 1/6
down down
IPv4 Routing
Description
Displays type of interface and the associated slot and port
number.
Displays the IP address for the interface, if configured.
Indicates if the hardware is functioning properly.
Displays "Manual" if the configuration is read from the saved
configuration.
States whether the interface is enabled (up) or disabled
(administratively down).
States whether IP is enabled (up) or disabled (down) on the
interface.
IP-Address OK? Method
Protocol
unassigned NO
unassigned NO
unassigned YES Manual
up
unassigned YES Manual
up
unassigned YES Manual
up
10.10.10.1 YES Manual
up
unassigned NO
Manual administratively
Manual administratively
Manual administratively
899