Show Qos Dcb-Input - Dell S4810 Reference Manual

Version
8.3.19.0
Version
8.3.12.0
Version
8.3.16.0
Example
Dell (conf-if-te-0/1)#show int te 0/1 pfc statistics
(Summary)
Interface TenGigabitEthernet 0/1
Priority
Frames
---------------------------------------------------------------
-----------------------
-
0
0
1
0
2
0
3
0
4
0
5
0
6
0
7
0

show qos dcb-input

Displays the PFC configuration in a DCB input policy.
S4810
Syntax
show qos dcb-input [dcb-input-policy-name]
Parameters
dcb-input-
policyname
Command EXEC Privilege
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
8.3.19.0
Data Center Bridging (DCB)
Introduced on the S4820T.
Introduced on the S4810.
Introduced on the MXL 10/40GbE Switch IO Module.
Rx XOFF Frames
Tx Total Frames
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
Enter the PFC profile.
Introduced on the S4820T.
Rx Total
535