Dell S4810 Reference Manual page 134

Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0
Version 9.0.0.0
Version
8.3.19.0
Version
8.3.12.0
Version 8.3.11.1
Version 7.8.1.0
Usage The following example shows the output of the show environment fan
Information
command.
Example (all)
Dell#show environment
--
Unit Bay
---------------------------------------------------------------
---------------------
0
0
0
Speed in RPM
--
Unit
---------------------------------------------------------------
------------
-- Unit Environment Status
Unit
---------------------------------------------------------------
------------
* 0
* Management Unit
--
Unit
Sensor6
---------------------------------------------------------------
------
31
Dell#show environment fan
134
Introduced on the S6000.
Introduced on the Z9000.
Introduced on the S4820T.
Introduced on the S4810.
Introduced on the Z9000.
The output of the show environment fan command for
the S-Series is changed to display fan speeds instead of
showing the fan status as up or down.
Fan Status --
TrayStatus
0 up
1 up
2 up
Power Supplies
Bay Status
0 0 down
0 1 up
Status
online
Thermal Sensor Readings (deg C)
Sensor0 Sensor1
0 40 36
46
Fan0 Speed
up 6971
up 6971
up 7021
--
Type FanStatus
UNKNOWN down
AC up
--
Temp Voltage
36C ok
--
Sensor2 Sensor3
37 37
Fan1 Speed
up 7072
up 7021
up 7021
FanSpeed(rpm)
0
6504
TempStatus
1
Sensor4 Sensor5
31
Control and Monitoring