Interface - Dell S4810 Reference Manual

interface

Configure the primary, secondary, and control-vlan interfaces.
S4810
Syntax
interface {primary interface secondary interface control-vlan
vlan-id}
To return to the default, use the no interface {primary interface
secondary interface control-vlan vlan-id} command.
Parameters
primary
interface
secondary
interface
control-vlan
vlan-id
Defaults none
Command CONFIGURATION (conf-frrp)
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Force10 Resilient Ring Protocol (FRRP)
Enter the keyword primary to configure the primary
interface then one of the following interfaces and slot/port
information:
• Fast Ethernet interface: enter the keyword
FastEthernet then the slot/port information.
• Port Channel interface: enter the keyword port-
channel then a number. The range is from 1 to 128.
• 10-Gigabit Ethernet interface: enter the keyword
TenGigabitEthernet then the slot/port information
• 40-Gigabit Ethernet interface: enter the keyword
fortyGigE then the slot/port information
Enter the keyword secondary to configure the secondary
interface then one of the following interfaces and slot/port
information:
• Fast Ethernet interface: enter the keyword
FastEthernet then the slot/port information.
• Port Channel interface: enter the keyword port-
channel then a number. The range is from 1 to 128.
• 10-Gigabit Ethernet interface: enter the keyword
TenGigabitEthernet then the slot/port information
• 40-Gigabit Ethernet interface: enter the keyword
fortyGigE then the slot/port information
Enter the keyword control-vlan then the VLAN ID. The
range is from 1 to 4094.
679