Dell S4810 Reference Manual page 878

Parameters
{ip-selection|
ipv6-selection
[source-ip |
source-ipv6 |
source-port-id
| source-
module-id |
dest-ip | dest-
ipv6 | dest-
port-id | dest-
module-id |
protocol | vlan |
L4-source-port
| L4-dest-port ]
mac [source-
mac | source-
port-id |
source-
module-id |
dest-mac |
dest-port-id |
dest-module-
id | vlan |
ethertype |
source-dest-
mac ]
tunnel [ipv4-
over-ipv4 |
ipv4-over-gre-
ipv4 | mac-in-
mac]}
878
To use IPv4 key fields in hash computation, enter the
keyword ip-selection then one of the parameters. To use
IPv6 key fields in hash computation, enter the keyword
ipv6-selection then one of the parameters.
• source-ip — Use IPv4 src-ip field in hash calculation.
• source-ipv6 — Use IPv6 src-ip field in hash calculation
• source-port-id — Use src-port-id field in hash
calculation.
• source-module-id — Use src-module-id field in hash
calculation.
• dest-ip — Use IPv4 dest-ip field in hash calculation.
• dest-ipv6 — Use IPv6 dest-ip field in hash calculation
• dest-port-id — Use dest-port-id field in hash calculation.
• dest-module-id — Use dest-module-id field in hash
calculation.
• protocol — Use IPv4 protocol field in hash calculation.
• vlan — Use vlan field in hash calculation.
• L4-source-port — Use IPv4 L4-source-port field in hash
calculation.
• L4-dest-port — Use IPv4 L4-dest-port field in hash
calculation.
To use MAC key fields in hash computation, enter the
keyword mac then one of the parameters:
• source-mac — Use source-mac field in hash calculation.
• source-port-id — Use src-port-id field in hash
calculation.
• source-module-id — Use src-module-id field in hash
calculation.
• dest-mac — Use dest-mac field in hash calculation.
• dest-port-id — Use dest-port-id field in hash calculation.
• dest-module-id — Use dest-module-id field in hash
calculation.
• vlan — Use vlan field in hash calculation .
• ethertype — Use Ethertype field in hash calculation.
• source-dest-mac — Use SMAC and DMAC fields in hash
calculation.
To use tunnel key fields in hash computation, enter the
keyword tunnel then one of the parameters:
• ipv4-over-ipv4 — Use ipv4-over-ipv4 field in hash
calculation.
• ipv4-over-gre-ipv4 — Use ipv4-over-gre-ipv4 field in
hash calculation.
• mac-in-mac — Use mac-in-mac field in hash calculation.
IPv4 Routing