Ssh - Dell S4810 Reference Manual

Version
8.3.19.0
Version
8.3.12.0
Example
Dell #show ip ssh
SSH server
SSH server version
Password Authentication
Hostbased Authentication
RSA Authentication
Vty
1
2
With FIPS Mode enabled:
Dell #show ip ssh
SSH server
SSH server version
Password Authentication
Hostbased Authentication
RSA Authentication
Vty
0
1

ssh

Open an SSH connection specifying the hostname, username, port number, and version of the SSH
client.
S4810
Syntax
ssh {hostname|ipv4 address|ipv6 address} [-c encryption
cipher|-l username|-m HMAC alogorithm|-p port-number|-v {1|2}]
Parameters
hostname
ipv4 address
ipv6
addressprefix
FIPS Cryptography
Introduced on the S4820T.
Introduced on S4810.
: disabled.
Encryption HMAC
3des-cbc
3des-cbc
: disabled.
Encryption HMAC
aes128-cbc hmac-sha1 10.11.8.13
aes128-cbc hmac-sha1 10.1.20.48
(OPTIONAL) Enter the IP address or the hostname of the
remote device.
(OPTIONAL) Enter the IP address in dotted decimal format
A.B.C.D.
(OPTIONAL) Enter the IPv6 address in the x:x:x:x::x format
then the prefix length in the /x format. The range is from /0
to /128
NOTE: The :: notation specifies successive hexadecimal
fields of zeros.
: enabled.
: v1 and v2.
: enabled.
: disabled.
Remote IP
hmac-md5 10.1.20.48
hmac-md5 10.1.20.48
: enabled.
: v2.
: enabled.
: disabled.
Remote IP
655