Configure - Dell S4810 Reference Manual

aux 0
console 0
vty number
Command EXEC Privilege
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0
Version
8.3.19.0
Version 8.3.11.1
Version 8.3.7.0
Version 8.1.1.0
Version 7.6.1.0
Version 7.5.1.0
E-Series

configure

Enter CONFIGURATION mode from EXEC Privilege mode.
S4810
Syntax
configure [terminal]
Parameters
terminal
Command EXEC Privilege
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Control and Monitoring
Enter the keywords aux 0 to reset the auxiliary port.
Enter the keywords console 0 to reset the console port.
Enter the keyword vty then a number to clear a terminal
line. The range is from 0 to 9.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the E-Series ExaScale.
Introduced on the S-Series.
Introduced on the C-Series.
Original command.
(OPTIONAL) Enter the keyword terminal to specify that
you are configuring from the terminal.
95