Show Ip Route Summary - Dell C9000 Series Reference Manual

show ip route summary

View a table summarizing the IP routes in the switch.
C9000 Series
Syntax
show ip route summary
Command Modes
Command History
This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.9(0.0)
9.2(1.0)
8.3.19.0
8.3.11.1
8.3.7.0
8.1.1.0
7.6.1.0
7.5.1.0
6.1.1.0
Usage Information The following describes the show ip route summary shown in the following
example.
Column
Heading
Route Source
Active Routes
Non-active
Routes
• EXEC
• EXEC Privilege
Description
Introduced on the C9010.
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the E-Series ExaScale.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
Description
Identifies how the route is configured in the system.
Identifies the best route if a route is learned from two protocol
sources.
Identifies the back-up routes when a route is learned by two
different protocols. If the best route or active route goes down,
the non-active route becomes the best route.
IPv4 Routing 1231