Lease - Dell C9000 Series Reference Manual

Parameters
ipv6-address
Default Disabled.
Command Modes INTERFACE
Command History
This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.9(0.0)
9.7(0.0)
Usage Information Use this command on the interfaces where the DHCP clients are connected to forward
the packets from clients to DHCP server and vice-versa.
Example
Dell(conf-if-te-0/0)#ipv6 helper-address
X:X:X:X::X

lease

Specify a lease time for the addresses in a pool.
C9000 Series
Syntax
lease {days [hours] [minutes] | infinite}
Parameters
days
hours
minutes
infinite
Defaults 24 hours
Command Modes DHCP <POOL>
Enter the keywordipv6–address through which the server
address can be reached.
Description
Introduced on the C9010.
Introduced on the S4810, S4820T, S6000, S6000–ON, Z9000,
and Z9500.
IPv6 helper address
Enter the number of days of the lease. The range is from 0 to 31.
Enter the number of hours of the lease. The range is from 0 to
23.
Enter the number of minutes of the lease. The range is from 0 to
59.
Specify that the lease never expires.
Dynamic Host Configuration Protocol (DHCP) 816