Debug Ip Dhcp Client Events - Dell C9000 Series Reference Manual

client statistics {all
| interface type
slot/port}
conflicts
server statistics
Defaults none
Command Modes EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.9(0.0)
9.2(1.0)
8.3.19.0
8.3.11.1
8.3.7.0
8.2.1.0
Usage Information Entering <CR> after the clear ip dhcp binding command clears all the IPs from
the binding table.

debug ip dhcp client events

Activate the debugging and display of log messages on DHCP client interfaces for IP address acquisition, IP
address release, and IP address and lease time renewal.
C9000 Series
Syntax
debug ip dhcp client events [interface type slot/port]
Enter the keywords server statistics all to clear all
counter information on all DHCP client interfaces on the switch.
Enter an interface type and slot/port information to clear DHCP
counters on a specified interface. The valid interface types are:
• For a 10-Gigabit Ethernet interface, enter the keyword
tengigabitethernet.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE.
Enter the keyword conflicts to delete all of the log entries
created for IP address conflicts.
Enter the keywords server statistics to clear all counter
information on the DHCP server.
Description
Introduced on the C9010.
Introduced on the Z9500.
Introduced on the S4820t.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the C-Series and S-Series.
Dynamic Host Configuration Protocol (DHCP) 802