Show Ip Fib Linecard - Dell C9000 Series Reference Manual

show ip fib linecard

View all forwarding information base (FIB) entries.
C9000 Series
Syntax
show ip fib linecard linecard id {vrf <vrf-id>/<A.B.C.D>/summary}
Parameters
linecard
vrf
A.B.C.D.
summary
Command Modes EXEC
Command History
This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.9(0.0)
9.2(1.0)
8.3.19.0
8.3.7.0
8.1.1.0
7.9.1.0
7.5.1.0
6.1.1.0
Example
Dell>show ip fib linecard 2
Destination
Hop
----------------------------------------------------------------
------------------- ----------------- ------------
1.1.32.140/32 via 1.1.32.140, PeGigE PE‐ID/Slot/Port
00:00:00:00:1f:8a
Displays the fib entries for the mentioned linecard id.
Displays the fib entries for the mentioned vrf-id. Otherwise, vrf
displays the default vrf entries.
Displays the fib entry for the mentioned prefix.
Displays the fib summary.
Description
Introduced on the C9010.
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the S4810.
Introduced on the E-Series ExaScale.
Introduced VRF on the E-Series.
Introduced on the C-Series.
Introduced on the E-Series.
Gateway
Mac-Addr
PeGigE PE‐ID/Slot/Port 200
Port VId
First-
EC
1.1.32.140
0
IPv4 Routing 1217