Advertise Dot3-Tlv - Dell C9000 Series Reference Manual

advertise dot3-tlv

Advertise dot3 TLVs (Type, Length, Value).
C9000 Series
Syntax
advertise dot3-tlv {max-frame-size}
To remove advertised dot3-tlv, use the no advertise dot3-tlv {max-frame-
size} command.
Parameters
max-frame-size
Defaults none
Command Modes CONFIGURATION (conf-lldp) and INTERFACE (conf-if-interface-lldp)
Command History
This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.9(0.0)
9.2(1.0)
8.3.19.0
8.3.11.1
8.3.7.0
7.7.1.0
7.6.1.0
7.4.1.0
advertise dot3-tlv
Configure the system or an interface to advertise IEEE 802.3at extended power-via-mdi.
C9000 Series
Syntax
advertise dot3-tlv power-via-mdi
Enter the keywords max-frame-size to advertise the dot3
maximum frame size.
Description
Introduced on the C9010.
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
Link Layer Discovery Protocol (LLDP) 1361