Service-Queue - Dell C9000 Series Reference Manual

service-queue

Assign a class map and QoS policy to different queues.
C9000 Series
Syntax
service-queue queue-id [class-map class-map-name] [qos-policy qos-
policy-name]
To remove the queue assignment, use the no service-queue queue-id [class-
map class-map-name] [qos-policy qos-policy-name] command.
Parameters
queue-id
class-map class-
map-name
qos-policy qos-
policy-name
Defaults none
Command Modes CONFIGURATION (conf-policy-map-in and conf-policy-map-out)
Command History
This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.9(0.0)
9.2(1.0)
8.3.19.0
8.3.11.1
8.3.7.0
7.6.1.0
Enter the value used to identify a queue. The range is from 0 to
7.
(OPTIONAL) Enter the keyword class-map then the class map
name assigned to the queue in character format (32 character
maximum).
NOTE: This option is available under policy-map-
input only.
(OPTIONAL) Enter the keywords qos-policy then the QoS
policy name assigned to the queue in text format (32 characters
maximum). This specifies the input QoS policy assigned to the
queue under policy-map-input and output QoS policy under
policy-map-output context.
Description
Introduced on the C9010.
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Quality of Service (QoS) 1825