Fefd Interval - Dell C9000 Series Reference Manual

Version
9.2(1.0)
8.3.19.0
8.3.11.1
8.3.7.0
Usage Information When you enter no fefd for an interface and fefd-global, FEFD is enabled on the
interface because the no fefd command is not retained in the configuration file. To
keep the interface FEFD disabled when the global configuration changes, use the fefd
reset command.
Related
Commands

fefd interval

Set an interval between control packets.
C9000 Series
Syntax
fefd interval seconds
To return to the default value, use the no fefd interval command.
Parameters
seconds
Defaults 15 seconds
Command Modes INTERFACE
Command History
The following is the Dell Networking OS version history for this command.
Version
9.9(0.0)
9.2(1.0)
8.3.19.0
8.3.11.1
8.3.7.0
Description
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
• fefd reset — enables FEFD globally on the system.
• fefd mode — changes FEFD mode on an interface.
Enter a number as the time between FEFD control packets. The
range is from 3 to 255 seconds. The default is 15 seconds.
Description
Introduced on the C9010.
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Layer 2 1342