Show Fip-Snooping Config - Dell C9000 Series Reference Manual

Command Modes INTERFACE
Command History
This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.9(0.0)
8.3.19.0
8.3.12.0
8.3.16.0
Usage Information The maximum number of FCoE VLANs supported on the switch is eight.

show fip-snooping config

Display the FIP snooping status and configured FC-MAP values.
C9000 Series
Syntax
show fip-snooping config
Command Modes
Command History
This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.9(0.0)
8.3.19.0
8.3.12.0
Example
Dell# show fip-snooping config
FIP Snooping Feature enabled Status: Enabled
FIP Snooping Global enabled Status: Enabled
Description
Introduced on the C9010.
Introduced on the S4820T.
Introduced on the S4810.
Introduced on MXL 10/40GbE Switch IO Module.
NOTE: This command is not supported on cascade interfaces or extended ports.
• EXEC
• EXEC Privilege
Description
Introduced on the C9010.
Introduced on the S4820T.
Introduced on the S4810.
FCoE Transit 860