Dell C9000 Series Reference Manual page 505

Networking command-line reference guide

Hide thumbs Also See for C9000 Series:

Table of Contents

Usage Information When you enable the bgp non-deterministic-med command, the show ip bgp

command output for a BGP route does not list the INACTIVE reason.

In BGP, this command displays the exact reason why the route is discarded.

The following describes the show ip bgp command shown in the following example.

The show ip bgp command displays the dmzlink-dw details only if dmzlink-bw is

enabled using the bgp dmzlink-dw command.

Dell#show ip bgp

BGP local RIB : Routes to be Added 0, Replaced 0, Withdrawn 0

BGP local router ID is 192.168.11.5

Status codes: s suppressed, S stale, d dampened, h history, *

valid, > best

Path source: I - internal, a - aggregate, c - confed-external, r

- redistributed

Origin codes: i - IGP, e - EGP, ? - incomplete

Introduced on the S6000.

Introduced on the S4820T.

Introduced on the Z9000.

Added the add-path option to the S4810. Output on the S4810

shows the ADDPATH parameters.

Introduced on the S4810.

Introduced on the S-Series.

Introduced on the C-Series.

Displays the destination network prefix of each BGP route.

Displays the next hop address of the BGP router. If 0.0.0.0 is

listed in this column, then local routes exist in the routing table.

Displays the BGP route's metric, if assigned.

Displays the BGP LOCAL_PREF attribute for the route.

Displays the route's weight.

Lists all the ASs the route passed through to reach the

destination network.

n - network,

Border Gateway Protocol

Chapters

Table of Contents