Show Memory - Dell C9000 Series Reference Manual

Related
Commands

show memory

View current memory usage on the system.
C9000 Series
Syntax
show memory [cp | lp {slot-id | pe [pe-id stack-unit unit-number]
| rp}]
Parameters
cp
rp
lp slot-id
pe pe-id
stack-unit unit-
number
Command Modes
Defaults Display memory usage on all switch CPUs (Control Processor, Route Processor, and
line cards).
Command History
This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
• login statistics — enable and configure user login statistics on console and virtual
terminal lines.
• login concurrent-session
users on console and virtual terminal lines.
Enter the keyword cp to display memory usage on the Control
Processor CPU.
Enter the keyword rp to display memory usage on the Route
Processor CPU.
Enter the slot ID of the line card for which you want to display
memory usage. The slot ID range is from 0 to 11.
Enter the keyword pe then the port extender (PE) ID to display
memory usage on the PE. The PE ID range is from 0 to 255.
Enter the keyword stack-unit then the stack unit number.
Range is from 0 to 7.
• EXEC
• EXEC Privilege
— configures the limit of concurrent sessions for all
NOTE: The pe option is only available when the
extended bridge feature is enabled.
Control and Monitoring 142