Banner Exec - Dell C9000 Series Reference Manual

banner exec

Configure a message that is displayed when your enter EXEC mode.
C9000 Series
Syntax
banner exec c line c
To delete a banner, use the no banner exec command.
Parameters
c
line
Defaults No banner is displayed.
Command Modes CONFIGURATION
Command History
This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.9(0.0)
9.2(1.0)
8.3.19.0
8.3.12.0
8.3.11.1
8.1.1.0
7.6.1.0
7.5.1.0
E-Series
Usage Information After entering the banner exec command, type one or more spaces and a delineator
character. Enter the banner text then the second delineator character. When you
connect to the router, if a message of the day banner is configured, it displays first. If no
Enter the keywords banner exec, then enter a character
delineator, represented here by the letter c. Press ENTER.
Enter a text string for your banner message ending the message
with your delineator. In the following example, the delineator is
a percent character (%); the banner message is "testing, testing".
Description
Introduced on the C9010.
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the S4810.
Introduced on the Z9000.
Introduced on the E-Series ExaScale.
Introduced on the S-Series.
Introduced on the C-Series.
Original Command
Control and Monitoring 70