Show Acl-Vlan-Group - Dell C9000 Series Reference Manual

Parameters
VLAN-range
Default None
Command Modes ACL-VLAN-GROUP CONFIGURATION (conf-acl-vl-grp)
Command History
Version
9.9(0.0)
9.5(0.0)
9.3(0.0)
Usage Information At a maximum, there can be only 32 VLAN members in all ACL VLAN groups. A VLAN
can belong to only one ACL VLAN group at a time.
You can create an ACL VLAN group and attach the ACL with the VLAN members. The
optimization is applicable only when you create an ACL VLAN group. If you apply an
ACL separately on the VLAN interface, each ACL has a mapping with the VLAN and
increased CAM space utilization occurs.
Attaching an ACL individually to VLAN interfaces is similar to the behavior of ACL-VLAN
mapping storage in CAM prior to the implementation of the ACL VLAN group
functionality.

show acl-vlan-group

Display the configured ACL VLAN groups on the switch.
C9000 Series
Syntax
show acl-vlan-group {group-name | detail}
Parameters
group-name
detail
Enter the member VLANs using comma-separated VLAN IDs, a
range of VLAN IDs, a single VLAN ID, or a combination. For
example:
Comma-separated: 3, 4, 6
Range: 5-10
Combination: 3, 4, 5-10, 8
Description
Introduced on the C9010.
Introduced on the Z9500.
Introduced on the S4810, S4820T, and Z9000.
Display the configuration of an ACL VLAN group.
Display information about all configured ACL VLAN groups in a
line-by-line format.
Access Control Lists (ACL) 324