Dcbx Commands; Advertise Dcbx-Tlv - Dell C9000 Series Reference Manual

0
1
2
3
4
5
6
7
Oper status is init
ETS DCBX Oper status is Down
Reason: Port Shutdown
State Machine Type is Asymmetric
Conf TLV Tx Status is enabled
Reco TLV Tx Status is enabled

DCBX Commands

The following DCBX commands are supported on the Dell Networking OS.

advertise dcbx-tlv

On a DCBX port with a manual role, configure the PFC and ETS TLVs advertised to DCBX peers.
C9000 Series
Syntax
advertise dcbx-tlv {ets-conf | ets-reco | pfc} [ets-conf | ets-
reco | pfc] [ets-conf | ets-reco | pfc]
To remove the advertised ETS TLVs, use the no advertise dcbx-tlv command.
Parameters
{ets-conf | ets-
reco | pfc}
Defaults All PFC and ETS TLVs are advertised.
Command Modes PROTOCOL LLDP
Command History
This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide.
0,1,2,3,4,5,6,7
Enter the PFC and ETS TLVs advertised, where:
• ets-conf: enables the advertisement of ETS
configuration TLVs.
• ets-reco: enables the advertisement of ETS recommend
TLVs.
• pfc: enables the advertisement of PFC TLVs.
100 - -
- - -
- - -
- - -
- - -
- - -
- - -
- - -
Data Center Bridging (DCB)
- - ETS
- - -
- - -
- - -
- - -
- - -
- - -
- - -
707