Dot1X Max-Eap-Req - Dell C9000 Series Reference Manual

dot1x max-eap-req

Configure the maximum number of times an extensive authentication protocol (EAP) request is transmitted
before the session times out.
C9000 Series
Syntax
dot1x max-eap-req number
To return to the default, use the no dot1x max-eap-req command.
Parameters
number
Defaults 2
Command Modes
INTERFACE
ITNERFACE (BATCH MODE)
Command History
This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.10(0.0)
9.9(0.0)
9.2(1.0)
8.3.19.0
8.3.12.0
8.3.11.1
7.6.1.0
7.4.1.0
Enter the number of times an EAP request is transmitted before
a session time-out. The range is from 1 to 10. The default is 2.
Description
Introduced the Configuration Terminal Batch mode on C9010.
Introduced on the C9010.
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the S4810.
Introduced on the Z9000.
Introduced on the C-Series and S-Series.
Introduced on the E-Series.
802.1X 250