Dell C9000 Series Reference Manual page 131

fan
linecard
pe pe-id
pem
stack-unit
media
thermal-sensors
Default Display status information on all system components.
Command Modes
•
•
Command History
This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.9(0.0)
9.8(0.0)
9.7(0.0)
9.2(1.0)
9.0.2.0
9.0.0.0
8.3.19.0
8.3.12.0
8.3.11.1
Enter the keyword fan to view information on the fans. The
output of this command is chassis dependent.
Enter the keyword linecard to view information on the
linecard environment status.
Enter the keyword pe and the port extender (PE) ID to display
environment status for PE. The PE ID range is from 0 to 255.
NOTE:
extended bridge feature is enabled.
Enter the keyword pem to view only information on power entry
modules.
Enter the keyword stack-unit to view information on stack-
unit.
Enter the keyword media to view information on optical media
transceivers.
Enter the keyword thermal-sensors to display only
temperatures and thresholds for the system and switching core,
and port modules.
EXEC
EXEC Privilege
Description
Introduced on the C9010 and C1048P.
Introduced on the S3048-ON and S4048-ON.
Introduced on the S6000-ON.
Introduced on the Z9500.
Introduced on the S6000.
Introduced on the Z9000.
Introduced on the S4820T.
Introduced on the S4810.
Introduced on the Z9000.
The pe option is only available when the
Control and Monitoring 131