Dell C9000 Series Reference Manual page 563

Parameters
ipv6-address
prefix-length
advertise-map
map-name
as-set
attribute-map
map-name
summary-only
suppress-map
map-name
Defaults Not configured.
Command Modes CONFIGURATION-ROUTER-BGPV6-ADDRESS FAMILY
Command History
Version
9.9(0.0)
9.2(1.0)
8.2.1.0
7.4.1.0
Usage Information At least one of the routes included in the aggregate address must be in the BGP routing
table for the configured aggregate to become active.
Do not add the as-set parameter to the aggregate if routes within the aggregate are
constantly changing as the aggregate will flap to keep track of the changes in the
AS_PATH.
In route maps used in the suppress-map parameter, routes meeting the deny clause
are not suppress; in other words, they are allowed. The opposite is true: routes meeting
the permit clause are suppressed.
Enter the IPv6 address in the x:x:x:x::x format followed by the
prefix length in the /x format. The range is /0 to /128.
NOTE: The :: notation specifies successive hexadecimal
fields of zeros.
(OPTIONAL) Enter the keywords advertise-map followed by
the name of a configured route map to set filters for advertising
an aggregate route.
(OPTIONAL) Enter the keywords as-set to generate path
attribute information and include it in the aggregate.
AS_SET includes AS_PATH and community information from the
routes included in the aggregated route.
(OPTIONAL) Enter the keywords attribute-map followed by
the name of a configured route map to modify attributes of the
aggregate, excluding AS_PATH and NEXT_HOP attributes.
(OPTIONAL) Enter the keywords summary-only to advertise
only the aggregate address. Specific routes will not be
advertised.
(OPTIONAL) Enter the keywords suppress-map followed by the
name of a configured route map to identify which more-specific
routes in the aggregate are suppressed.
Description
Introduced on the C9010.
Introduced on the Z9500.
Introduced on the E-Series ExaScale.
Introduced
Border Gateway Protocol 563