Copy - Dell C9000 Series Reference Manual

usbflash:
([[usbflash://]direc
tory_path])
Command Modes EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.9(0.0)
9.7(0.1)
9.7(0.0)
9.0.2.0
8.3.19.0
8.3.11.1
8.3.7.0
7.6.1.0
7.5.1.0
E-Series
Usage Information You can also use the cd {flash: directory name/path | usbflash
directory name/path} command from a port extender (PE) console to change the
working directory.
Example
Dell#cd flash://TRACE_LOG_DIR

copy

Copy one file to another location. Dell Networking OS supports IPv4 and IPv6 addressing for FTP, TFTP, and
SCP (in the hostip field).
C9000 Series
Syntax
copy compressed-config source-filename destination-filename
Enter the USB flash directory name and the directory path.
Description
Introduced on the C9010 and C1048P.
Introduced on the S3048-ON and S4048-ON.
Introduced on the S6000-ON. Added the nfsmount:<mount-
point> parameters to support remote NFS file system.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
Original command.
File Management 203