Neighbor Default-Originate - Dell C9000 Series Reference Manual

peer-group-name
number
Defaults Not configured.
Command Modes ROUTER BGP
Command History
Version
9.9(0.0)
9.2(1.0)
8.2.1.0
7.4.1.0
Related bgp four-octet-as-support
Commands

neighbor default-originate

Inject the default route to a BGP peer or neighbor.
C9000 Series
Syntax
neighbor {ipv6-address | peer-group-name} default-originate
[route-map map-name]
To remove a default route, use the no neighbor {ipv6-address | peer-group-
name} default-originate [route-map map-name] command.
Parameters
ipv6-address
peer-group-name
route-map map-
name
Defaults Not configured.
Command Modes ROUTER BGPV6-ADDRESS FAMILY
Enter the name of the peer group to set the advertisement
interval for all routers in the peer group.
Enter a number of times to allow this neighbor ID to use the AS
path. The range is 1 to 10.
Description
Introduced on the C9010.
Introduced on the Z9500.
Introduced on the E-Series ExaScale.
Introduced
– enables 4-Byte support for the BGP process.
Enter the IPv6 address in the x:x:x:x::x format.
NOTE: The :: notation specifies successive hexadecimal
fields of zeros.
Enter the name of the peer group to set the advertisement
interval for all routers in the peer group.
(OPTIONAL) Enter the keywords route-map followed by the
name of a configured route map.
Border Gateway Protocol 599