Passive-Interface - Dell C9000 Series Reference Manual

Networking command-line reference guide

Hide thumbs Also See for C9000 Series:

Table of Contents

passive-interface

Suppress routing updates on an interface. This command stops the router from sending updates on that

C9000 Series

passive-interface interface

To delete a passive interface configuration, use the no passive-interface

interface command.

Not configured.

Command Modes

Command History

This guide is platform-specific. For command information about other platforms, refer

to the relevant Dell Networking OS Command Line Reference Guide.

Introduced on the C9010.

Introduced on the Z9500.

Introduced on the S6000.

Introduced on the S4820T.

Introduced on the S4810.

Introduced on the Z9000.

Enter the following keywords and slot/port or number

information:

For a 10-Gigabit Ethernet interface, enter the keyword

TenGigabitEthernet then the slot/port information.

For a 40-Gigabit Ethernet interface, enter the keyword

fortyGigE then the slot/port information.

For Loopback interface, enter the keyword loopback then

a number from 0 to 16383.

For a Port Channel interface, enter the keywords port-

channel then a number. The range is from 1 to 128.

For a VLAN, enter the keyword vlan then a number from 1

Intermediate System to Intermediate System (IS-IS)

Table of Contents