Ip Msdp Default-Peer - Dell C9000 Series Reference Manual

Networking command-line reference guide

Hide thumbs Also See for C9000 Series:

Table of Contents

show ip msdp sa-cache rejected-sa

ip msdp default-peer

Define a default peer from which to accept all source-active (SA) messages.

C9000 Series

ip msdp default-peer peer address [list name]

To remove the default peer, use the no ip msdp default-peer {peer address}

list name command.

peer address

Not configured.

Command Modes

CONFIGURATION

Command History

This guide is platform-specific. For command information about other platforms, refer

to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Enter the peer address in a dotted decimal format (A.B.C.D.)

Enter the keywords list name and specify a standard access

list that contains the RP address that should be treated as the

default peer. If no access list is specified, then all SAs from the

peer are accepted.

Introduced on the C9010.

Introduced on the Z9500.

Introduced on the S4820T.

Introduced on the Z9000.

Introduced on the S4810.

Added the list option and removed the prefix-list option.

Multicast Source Discovery Protocol (MSDP)

Table of Contents