Debug Ip Pim - Dell C9000 Series Reference Manual

Command History
This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.9(0.0)
9.5(0.0)
9.0.2.0
8.3.19.0
8.3.11.1
8.3.7.0
8.1.1.0
7.8.1.0
Usage Information If you use this command on a local VLT node, all multicast routes from the local PIM
TIB, the entire multicast route table, and all the entries in the data plane are deleted.
The local VLT node sends a request to the peer VLT node to download multicast routes
learned by the peer. Both local and synced routes are removed from the local VLT node
multicast route table. The peer VLT node clears synced routes from the node.
If you use this command on a peer VLT node, only the synced routes are deleted from
the multicast route table.

debug ip pim

View IP PIM debugging messages.
C9000 Series
Syntax
debug ip pim [bsr | events | group | packet [in | out] | register
| state | timer [assert | hello | joinprune | register]]
To disable PIM debugging, use the no debug ip pim command or use the undebug
allto disable all debugging command.
Parameters
bsr
events
group
Description
Introduced on the C9010.
Introduced on the Z9500.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the E-Series ExaScale.
Introduced on the S-Series.
(OPTIONAL) Enter the keyword bsr to view PIM Candidate
RP/BSR activities.
(OPTIONAL) Enter the keyword group to view PIM messages for
a specific group.
(OPTIONAL) Enter the keyword group to view PIM messages for
a specific group.
PIM-Source Specific Mode (PIM-SSM) 1657