Match Ra - Dell C9000 Series Reference Manual

match ra

Enable verifying either of the configured source IPv6 address or prefix address or the source MAC address in
the inspected messages. If this command is not configured, the verification process is bypassed.
C9000 Series
Syntax
match ra {ipv6-access-list name | ipv6-prefix-list name | mac-
access-list name}
To reset the access list, use the no match ra{ipv6-access-list | ipv6-
prefix-list | mac-access-list}command.
Parameters
ipv6–access-list
name
ipv6–prefix-list
name
mac-access-list
name
Defaults none
Command Modes
CONFIGURATION
CONFIGURATION TERMINAL BATCH
Command History
This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.10(0.0)
9.9(0.0)
9.7(0.0)
9.7(0.0)
Enter the keywords ipv6–access-list then the access-list
name. The access-list name allows a maximum of 140
characters.
Enter the keywords ipv6–prefix-list then the prefix-list
name. The prefix-list name allows a maximum of 140
characters.
Enter the keywords mac-access-list then the mac-access-
list name. The mac-access-list name allows a maximum of 140
characters.
Description
Introduced the Configuration Terminal Batch mode on C9010.
Introduced on the C9010.
Introduced on the S6000-ON.
Introduced on the S4810, S4820T, S5000, S6000, and Z9000
switches.
Neighbor Discovery Protocol (NDP) 1447