Show Range - Dell C9000 Series Reference Manual

show range

Display all interfaces configured using the interface range command.
C9000 Series
Syntax
show range
Command Modes INTERFACE RANGE (config-if-range)
Command History
This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.9(0.0)
9.2(1.0)
8.3.19.0
8.3.11.1
8.3.7.0
8.2.1.0
8.1.1.0
7.6.1.0
7.5.1.0
6.1.1.0
Example
Dell(conf)#interface range peGigE 255/1/2
Dell(conf-if-range-pegi-255/1/2)#show range
interface peGigE255/1/2 - 0
Related
Commands
Description
Introduced on the C9010.
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Added support for 4093 VLANs on E-Series ExaScale.
Introduced on the E-Series ExaScale.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced.
• interface — configures a physical interface on the switch.
• show ip interface — displays Layer 3 information about the interfaces.
• show interfaces — displays information on a specific physical interface or virtual
interface.
Interfaces 1005