Dell C9000 Series Reference Manual page 535

ipv4 multicast
ipv4 unicast
ipv6 unicast
peer-group-name
detail
summary
Command Modes
•
•
Command History
This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.9(0.0)
9.8(0.0)
9.7(0.0)
9.4.(0.0)
8.3.19.0
8.3.11.1
8.3.8.0
8.3.7.0
7.8.1.0
7.7.1.0
NOTE:
BGP peers in a peer group that correspond to either a
default or a non-default VRF.
(OPTIONAL) Enter the keyword ipv4 followed by the keyword
multicast to view information related only to ipv4 multicast
routes.
(OPTIONAL) Enter the keyword ipv4 followed by the keyword
unicast to view information related only to ipv4 unicast routes.
(OPTIONAL) Enter the keyword ipv6 followed by the keyword
unicast to view information related only to ipv6 unicast routes.
(OPTIONAL) Enter the name of a peer group to view information
about that peer group only.
(OPTIONAL) Enter the keyword detail to view detailed status
information of the peers in that peer group.
(OPTIONAL) Enter the keyword summary to view status
information of the peers in that peer group. The output is the
same as that found in the show ip bgp summary command.
EXEC
EXEC Privilege
Description
Introduced on the C9010.
Introduced on the S3048–ON and S4048–ON.
Added the ipv4 multicast and ipv6 unicast parameters.
Introduced on S6000–ON.
Added support for VRF.
Introduced on the S4820T.
Introduced on the Z9000.
Added the add-path option to the S4810. Output on the S4810
shows the ADDPATH parameters.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
You can use this attribute to view information on
Border Gateway Protocol 535