Address Family Ipv6 Unicast; Aggregate-Address - Dell C9000 Series Reference Manual

Version
6.5.1.0
Usage Information Enter ipv6unicast to enter the BGP for IPv6 mode (CONF-ROUTER_BGPv6_AF).

address family ipv6 unicast

This command changes the context to subsequent address family identifier (SAFI).
C9000 Series
Syntax
address family ipv6 unicast
To remove SAFI context, use the no address family ipv6 unicast command.
Parameters
ipv6
unicast
Defaults IPv6 Unicast
Command Modes ROUTER BGPV6-ADDRESS FAMILY
Command History
Version
9.9(0.0)
9.2(1.0)
7.4.1.0
Usage Information All subsequent commands apply to this address family after you execute this command.
You can exit from this AFI/SAFI to the IPv6 Unicast (the default) family by entering exit
and returning to the Router BGP context.

aggregate-address

Summarize a range of prefixes to minimize the number of entries in the routing table.
C9000 Series
Syntax
aggregate-address ipv6-address prefix-length [advertise-map map-
name] [as-set] [attribute-map map-name] [summary-only] [suppress-
map map-name]
Description
Introduced
Enter the keyword ipv6 to specify the address family as IPv6.
Enter the keyword unicast to specify multicast as SAFI.
Description
Introduced on the C9010.
Introduced on the Z9500.
Introduced
Border Gateway Protocol 562