Ip Telnet Source-Interface - Dell C9000 Series Reference Manual

Networking command-line reference guide

Hide thumbs Also See for C9000 Series:

Table of Contents

Command Modes

CONFIGURATION

Command History

This guide is platform-specific. For command information about other platforms, refer

to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

ip ssh server

ip telnet source-interface

Set an interface's IP address as the source address in outgoing packets for Telnet sessions.

C9000 Series

ip telnet source-interface interface

To return to the default setting, use the no ip telnet source-interface

[interface] command.

Introduced on the C9010.

Introduced on the Z9500.

Introduced on the Z9000.

Introduced on the E-Series ExaScale.

Introduced on the S-Series.

Introduced on the C-Series.

Introduced on the E-Series.

— enables the secure shell (SSH) server on the system.

Enter the following keywords and slot/port or number

information:

For Loopback interfaces, enter the keyword loopback

then a number from zero (0) to 16383.

For a Port Channel, enter the keyword port-channel

then a number. The range is from 1 to 128.

For a 10-Gigabit Ethernet interface, enter the keyword

TenGigabitEthernet then the slot/port information.

For a 40-Gigabit Ethernet interface, enter the keyword

fortyGigE then the slot/port information.

Control and Monitoring

Table of Contents