interface
Configure the primary, secondary, and control-vlan interfaces.
C9000 Series
Syntax
interface {primary interface secondary interface control-vlan
vlan-id}
To return to the default, use the no interface {primary interface secondary
interface control-vlan vlan-id} command.
Parameters
primary interface
secondary
interface
control-vlan vlan-
id
Defaults
none
Command Modes
CONFIGURATION (conf-frrp)
Enter the keyword primary to configure the primary interface
then one of the following interfaces and slot/port information:
•
Fast Ethernet interface: enter the keyword
FastEthernet then the slot/port information.
•
Port Channel interface: enter the keyword port-
channel then a number. The range is from 1 to 128.
•
10-Gigabit Ethernet interface: enter the keyword
TenGigabitEthernet then the slot/port information
•
40-Gigabit Ethernet interface: enter the keyword
fortyGigE then the slot/port information
Enter the keyword secondary to configure the secondary
interface then one of the following interfaces and slot/port
information:
•
Fast Ethernet interface: enter the keyword
FastEthernet then the slot/port information.
•
Port Channel interface: enter the keyword port-
channel then a number. The range is from 1 to 128.
•
10-Gigabit Ethernet interface: enter the keyword
TenGigabitEthernet then the slot/port information
•
40-Gigabit Ethernet interface: enter the keyword
fortyGigE then the slot/port information
Enter the keyword control-vlan then the VLAN ID. The range
is from 1 to 4094.
Force10 OS Resilient Ring Protocol (FRRP)
888