Link Aggregation Control Protocol
This chapter contains commands for Dell Networks's implementation of the link aggregation control protocol
(LACP) for creating dynamic link aggregation groups (LAGs) — known as "port-channels" in the Dell
Networking operating software.
NOTE:
For static LAG commands, refer to
the standards specified in the IEEE 802.3 Carrier sense multiple access with collision detection (CSMA/CD)
access method and physical layer specifications.
Topics:
•
clear lacp counters
•
debug lacp
•
lacp long-timeout
•
lacp port-priority
•
lacp system-priority
•
port-channel mode
•
port-channel-protocol lacp
•
show lacp
clear lacp counters
Clear port channel counters.
C9000 Series
Syntax
clear lacp port-channel-number counters
Parameters
port-channel-
number
Defaults
Without a Port Channel specified, the command clears all Port Channel counters.
Command Modes
•
EXEC
Port Channel Commands
Enter a port-channel number. The range is from 1 to 128.
Link Aggregation Control Protocol (LACP)
(LACP)
in the
Interfaces
chapter), based on
30
1349