Other-Config-Flag - Dell C9000 Series Reference Manual

other-config-flag

Enable the verification of the advertised other configuration parameter. If this command is not configured, the
verification process is bypassed.
C9000 Series
Syntax
other-config-flag {on | off}
To reset the other configuration parameter, use the no other-config-flag {on |
off} command.
Parameters
on
off
Defaults none
Command Modes
CONFIGURATION
CONFIGURATION TERMINAL BATCH
Command History
This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.10(0.0)
9.9(0.0)
9.7(0.0)
9.7(0.0)
Enter the keyword on to set the other-config-flag value as ON.
Enter the keyword off to set the other-config flag value as OFF.
Description
Introduced the Configuration Terminal Batch mode on C9010.
Introduced on the C9010.
Introduced on the S6000-ON.
Introduced on the S4810, S4820T, S5000, S6000, and Z9000
switches.
Neighbor Discovery Protocol (NDP) 1449